Corner Rounding Router Bits
49524 Carbide Tipped Corner Round 1-1/4 Radius x 3 Inch Dia x 1-1/2 x 1/2 Shank
#49524
Diameter (D) | 3 |
---|---|
D1 | 1/2 |
Radius (R) | 1-1/4 |
Cutting Height (B) | 1-1/2 |
Shank (d) | 1/2 |
Overall Length (L) | 3-7/8 |
Replacement Bearing | 47706 |
Flutes | 2 |
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Maximum RPM 16,000. Use in a table-mounted router. Not for use in a handheld router! Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.
Excellent for cutting:
- Acrylic
- Laminate
- MDF/HDF
- Melamine
- Wood
- Plywood