8-Pc 'V' Carving CNC Router Bit Collection
AMS-128 8-Pc 'V' Carving CNC Router Bit Collection, 1/4 Inch Shank
#AMS-128
| (d) Shank | 1/4 |
|---|
Excellent for a wide-range of signmaking lettering and engraving tasks this set is specially designed for creating signs and other CNC projects in a variety of materials. Each router bit is manufactured from Amana’s exclusive grade carbide according to stringent quality standards.
Designed for cutting:
- Aluminum Brass Copper
- Carbon Fiber
- Laminate
- MDF
- Phenolic Composite
- Plastic
- Fiberglass
- Fiberglass PCB Board
- Wood
- Veneered Plywood
Stored in a solid wood showcase storage box with a Plexiglas® clear lid.
See below for set contents.
Wood Storage Box Dimensions
12" L x 6" W x 3" H
Product Questions
Can you please send me the recommended RPM and feed rates when using these bits to cut / carve SeaDek brand foam?
Question by: John Stroh on Apr 18, 2017, 8:34 PM
While I am not aware of this material specifically, I see it is a closed cell foam and although I do not have any experience with this material I believe if you start with the lowest chip load per tooth (around 0.0015”). Using the formula for the RPM = (SFM X 3.82) / cutting diameter of tool to find the RPM you could use 800(for the SFM).
I would be best to use the non-coated bits in this material.
I would be best to use the non-coated bits in this material.
Answer by: Amana Tool Admin on Apr 26, 2017, 7:04 PM
AMS-128 Set Includes:
| Tool No. | Product Name | Qty |
|---|---|---|
| 45771 Solid Carbide 30 Degree Engraving 0.005 Tip Width x 1/4 Inch Shank Signmaking | 1 | |
| 45783 Solid Carbide Carving Liner 18 Deg x 1/4 Dia x 5/8 x 1/4 Inch Shank x 1-Flute | 1 | |
| 46280 CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64 Radius x 1 x 1/4 Shank x 3 Inch Long x 3 Flute Solid Carbide Up-Cut Spiral ZrN Coated Router Bit | 1 | |
| 46282 CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Tip 1/16 Dia x 1/32 Radius x 1 x 1/4 Shank x 3 Inch Long x 4 Flute Solid Carbide Up-Cut Spiral ZrN Coated Router Bit | 1 | |
| RC-1075 CNC In-Groove Insert Engraving Tool Body 1/4 Inch Shank | 1 | |
| 45780 Solid Carbide V Groove Engraving 15 Deg x 3/16 Dia x 1/2 x 1/4 Inch Shank | 1 | |
| RCK-360 Solid Carbide Insert 30 Deg x 0.005 Inch V Tip Width Engraving Knife for In-Groove System | 1 | |
| 45705 Carbide Tipped V-Groove 60 Deg x 1/2 Dia x 7/16 x 1/4 Inch Shank | 1 | |
| 45700 Carbide Tipped V-Groove 90 Deg x 3/8 Dia x 3/16 x 1/4 Inch Shank | 1 |
