Flash plugin required. Download plugin here

Homepage > Router Bits > Profiling > Corner Rounding Router Bits

Corner Rounding Router Bits

2 Flute with Ball Bearing Guide

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.

	D	R	B	d	L	Tool No.
	5/8	1/16	5/16	1/4	1-3/4	49492
	5/8	1/16	5/16	1/2	2-1/4	49494
	3/4	1/8	3/8	1/4	2	49496
	1	1/8	3/8	1/4	2-3/16	RC-49496+
	3/4	1/8	3/8	1/2	2-5/16	49498
	13/16	5/32	3/8	1/4	2	49499
	13/16	5/32	3/8	1/2	2-1/4	49501
	7/8	3/16	1/2	1/4	2	49500
	7/8	3/16	1/2	1/2	2-7/16	49502
	1	1/4	1/2	1/4	2	49504
	1	1/4	1/2	1/4	2-1/16	RC-49504++
	1	1/4	1/2	1/2	2-7/16	49506
	1-1/8	5/16	1/2	1/4	2-1/16	49508
	1-1/8	5/16	1/2	1/2	2-7/16	49510
	1-1/4	3/8	5/8	1/4	2-3/16	49512
	1-1/4	3/8	5/8	1/2	2-9/16	49514
	1-3/8	7/16	5/8	1/2	2-9/16	49515
	1-1/2	1/2	3/4	1/4	2-1/4	49516
	1-1/2	1/2	3/4	1/2	2-5/8	49518
	1-5/8	9/16	3/4	1/2	2-5/8	49517
14!	1-3/4	5/8	7/8	1/2	2-3/4	49519
14!	2	3/4	1	1/2	2-7/8	49520
14!	2-1/4	7/8	1-1/4	1/2	3-1/16	49521
14!	2-1/2	1	1-1/4	1/2	3-3/16	49522*
10!	2-3/4	1-1/8	1-3/8	1/2	3-1/4	49523*
10!	3	1-1/4	1-1/2	1/2	3-1/4	49524*
10!	3-1/4	1-3/8	1-5/8	1/2	3-1/2	49525*
10!	3-1/2	1-1/2	1-3/4	1/2	3-5/8	49526*

*Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result. Replacement bearing #47706.
+Replacement Knife #RCK-268 (2 Required) ++Replacement Knife #RCK-272 (2 Required)

Warning: Maximum RPM 10!= 10,000; 14!= 14,000

NOTE: USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!