Flash plugin required. Download plugin here

Homepage > Router Bits > Profiling > Beading Router Bits

Beading Router Bits with Ball Bearing Guide

2 Flute with Ball Bearing Guide

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. A beading bit can be transformed into a corner rounding bit by changing the bearing (and vice versa).

	D	R	B	d	L	Tool No.
	5/8	1/16	5/16	1/4	1-3/4	49592
	5/8	1/16	5/16	1/2	2-1/4	49594
	3/4	1/8	3/8	1/4	2	49596
	3/4	1/8	3/8	1/2	2-5/16	49598
	3/4	5/32	3/8	1/4	2-1/4	49599
	3/4	5/32	3/8	1/2	2-1/2	49601
	7/8	3/16	1/2	1/4	2	49600
	7/8	3/16	1/2	1/2	2-7/16	49602
	1	1/4	1/2	1/4	2	49604
	1	1/4	1/2	1/2	2-7/16	49606
	1-1/8	5/16	1/2	1/4	2-1/16	49608
	1-1/8	5/16	1/2	1/2	2-7/16	49610
	1-1/4	3/8	5/8	1/4	2-3/16	49612
	1-1/4	3/8	5/8	1/2	2-9/16	49614
	1-3/8	7/16	5/8	1/2	2-9/16	49615
	1-1/2	1/2	3/4	1/4	2-1/4	49616
	1-1/2	1/2	3/4	1/2	2-5/8	49618
	1-5/8	9/16	3/4	1/2	2-5/8	49617
14!	1-3/4	5/8	7/8	1/2	2-3/4	49619
14!	2	3/4	1	1/2	2-7/8	49620
14!	2-1/4	7/8	1-1/4	1/2	3-1/16	49621
14!	2-1/2	1	1-1/4	1/2	3-3/16	*49622

Warning: Maximum RPM 14!= 14,000 *Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result. Replacement bearing #47702. Use in a table-mounted router. Not for use in a handheld router!

NOTE: USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!