Flash plugin required. Download plugin here

Homepage > Router Bits > Profiling > Classical Bead / Cove Router Bits

Classical Cove & Bead Router Bits

2 Flute with Ball Bearing Guide

The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. With the optional 3/8" pilot bearing, the bit produces a fillet at the base of the bead. Use in either handheld or table-mounted router. Largest diameter bits should be run at reduced speed.

	D	R	R1	B	d	L	Tool No.
	1-1/8	5/32	5/32	1/2	1/4	2	54128
	1-3/8	1/4	3/16	11/16	1/4	2-3/16	54130
	1-1/8	5/32	5/32	1/2	1/2	2-3/8	54132
	1-3/8	1/4	3/16	11/16	1/2	2-9/16	54134
	1-1/2	3/16	5/16	5/8	1/2	2-1/2	54292
18!	2	11/32	11/32	1-1/4	1/2	3-1/8	54100
18!	2	3/8	3/8	1	1/2	2-3/4	54135

A- Standard 1/2" Bearing #47706 (included)
B- Optional 3/8" Bearing #47702 (Order Separately)

Replacement bearings #47706.
Warning: Maximum RPM 18! = 18,000

Classical Bead & Cove Router Bits

2 Flute with Ball Bearing Guide

This bead-and-cove combines the two basic forms, separating them with a fillet. The cove comes off the pilot bearing. Produce a complex profile in a single pass. Use in either handheld or table mounted routers.