Aluminum Non-Ferrous Metals Circular Saw Blades

7" TO 20" - 6° Negative Hook - Triple Chip (TC) Grind
Saw Blade Application: Specially designed carbide and blade geometry for cutting relatively thin-walled aluminum & non-ferrous extrusions & frames. A coolant or blade wax should be used and proper clamping devices employed. WARNING! : NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades.

'D' Diameter				'B' Kerf		'C' Plate
Inch	MM	Teeth	Grind	Inch	MM	Inch	MM	Bore	*P.H.	Machines	Tool No.
7	180	58	TCG	.110	2.8	.087	2.2	5/8	---	---	575601
8	200	64	TCG	.110	2.8	.087	2.2	5/8	---	---	586401
9	230	60	TCG	.110	2.8	.087	2.2	5/8	---	---	596001
10	250	80	TCG	.126	3.2	.102	2.6	5/8	---	---	510801
10	250	80	TCG	.126	3.2	.102	2.6	5/8	---	---	510101
10	250	100	TCG	.134	3.2	.110	2.6	5/8	---	Pistorious	51010-HD
10	250	96	TCG	.126	3.2	.102	2.6	30MM	2/7/42 & 2/10/60	---	510801-30
12	300	96	TCG	.126	3.7	.102	2.6	30MM	2/10/60	---	512961-30
12	300	108	TCG	.126	3.1	.102	2.6	1	---	---	512961
14	350	100	TCG	.146	3.2	.118	2.2	5/8	---	Pistorious	514101-5/8HD
14	350	120	TCG	.122	3.1	.098	3.2	25MM	---	Makita	514101-25
14	350	120	TCG	.126	3.2	.102	3.2	1	---	---	514108
15	375	120	TCG	.120	3.1	.098	2.5	1	---	Hitachi	*515101
16	400	120	TCG	.150	3.8	.126	3.2	1	---	---	516121
18	450	120	TCG	.150	3.8	.126	3.2	1	---	---	518121
20	500	120	TCG	.174	4.4	.134	3.4	1	---	---	520121

*Products shown in Bold indicate most popular items.
For Hitachi Miter box (Thin Kerf).
Note: *P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60=2 @ 10MM dia. on 60MM circle.