Thick Walled Non-Ferrous Circular Saw Blades by Amana Tool

Aluminum Non-Ferrous Metals Circular Saw Blades
8" TO 18" - 6° Negative Hook - Triple Chip (TC) Grind
Saw Blade Application: Specially designed carbide and blade geometry for cutting aluminum & non-ferrous metal bars, and relatively thick-walled extrusions & profiles. Under certain conditions, these versatile saw blades can also be used to cut other 'difficult' materials such as plastic, PVC tubing and fiberglass. When cutting non-ferrous metals, a coolant or blade wax should be used and proper clamping devices employed. WARNING! : NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades.

'D' Diameter				'B' Kerf		'C' Plate
Inch	MM	Teeth	Grind	Inch	MM	Inch	MM	Bore	*P.H.	Tool No.
8	200	48	TCG	.110	2.8	.087	2.2	5/8	---	584801
10	250	60	TCG	.126	3.2	.102	2.6	5/8	---	510601
10	250	60	TCG	.126	3.2	.102	2.6	30MM	2/7/42 & 2/10/60	510601-30
12	300	72	TCG	.126	3.2	.102	2.6	1	---	512721
12	300	72	TCG	.126	3.2	.102	2.6	30MM	2/10/60	512721-30
14	350	84	TCG	.126	3.8	.102	2.6	1	---	514841
16	400	96	TCG	.150	3.8	.126	3.2	1	---	516961
18	450	108	TCG	.157	4.0	.134	3.4	1	---	518108

*Products shown in Bold indicate most popular items.
For Hitachi Miter box (Thin Kerf).
Note: *P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60=2 @ 10MM dia. on 60MM circle.

Aluminum Non-Ferrous Metals Circular Saw Blades