Industrial CNC Straight Plunge - Open Flute Router Bits by Amana Tool

CNC Straight Plunge - Open Flute Router Bits
2 Flute For high-volume production work with a CNC router, use one of these plunge-cutting straights. Long, 3/4" shanks extend the bit’s reach, enhancing its versatility. Open-flute design promotes rapid chip clearance, necessary for high feed rates. Available in both right-hand configuration (for standard clockwise rotation) and left-hand configuration (for counter-clockwise rotation “Topmaster” machines.)

Rotation	D	B	d	L	Tool No.
Left Hand	3/4	2	3/4	5	45454
Right Hand	3/4	2	3/4	4	45455
Right Hand	3/4	2-1/2	3/4	4-1/2	45456
Left Hand	3/4	2-1/2	3/4	5	45457
Right Hand	3/4	1-1/4	3/4	3-1/4	45458

NOTE: Chipbreaker option (special order): Designed to cut chipboard and MDF at high automatic feed rates found on CNC machines. Each flute is ground so that the chipbreakers are staggered to each other, giving a straight cut. To order, add ‘CB’ suffix (ie: #45454-CB).

CNC Straight Plunge - Open Flute Router Bit
2 Flute Specifically designed for CNC through plunge routing, this bit has a carbide boring tip. Open-flute design promotes rapid chip clearance, necessary for high feed rates.

CNC Straight Plunge - Open Flute Router Bits
2 Flute Mill broad surfaces with any of these large-diameter, plunge-cutting bits. The open flute design provides excellent chip clearance, essential for the high feed rates characteristic of CNC routers.