CNC Bullnose Router Bits by Amana Tool

CNC Bullnose Router Bits
2 Flute
Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The “nose diameter” (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table.

	*‘M’	R	B	D	d	L	Tool No.
18!	1-1/4	5/8	2	2	1/2	3-1/2	*51564-CNC
18!	1-1/2	3/4	2	2-3/8	1/2	3-1/2	*51566-CNC


Warning: Maximum RPM 18!= 18,000 ‘M’ denotes thickness of material on which a full 180° roundover can be accomplished. Warning: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only. Do not use in portable routers.