Flush Trim Template / Pattern Plunge Router Bits |
|
| 2 Flute |
This
bit is essentially a plunge-cutting straight
with a shank-mounted ball-bearing pilot.
It is a versatile bit, useful for template/pattern
routing of parts, joints, and internal
cuts, and can be used in handheld and table-mounted
routers. The template is attached to the
workpiece, and the pilot bearing rides
along its edge as the cutting edges rout
the workpiece, forming an exact duplicate
of the template. With a handheld router,
the pattern is on top of the work; with
a table-mounted router, the pattern is
underneath the work.
|
 |
 |
|
|
|
|
3/8 |
1/2 |
1/4 |
2 |
47751(2) |
47724 |
|
|
1/2 |
3/8 |
1/4 |
2-1/4 |
47701 |
47724 |
|
|
1/2 |
1/2 |
1/4 |
2 |
47701 |
47724 |
|
|
1/2 |
3/4 |
1/4 |
2-1/4 |
47701 |
47724 |
|
|
1/2 |
1 |
1/4 |
2-1/2 |
47701 |
47724 |
|
|
1/2 |
1-1/4 |
1/4 |
2-3/4 |
47701 |
47724 |
|
|
5/8 |
1 |
1/4 |
2-3/4 |
47712 |
47724 |
|
|
5/8 |
1/2 |
1/4 |
2-1/4 |
47712 |
47724 |
|
|
5/8 |
3/4 |
1/4 |
2-1/2 |
47712 |
47724 |
|
|
3/4 |
3/4 |
1/4 |
2-3/8 |
47714 |
47724 |
|
|
3/4 |
1 |
1/4 |
2-1/2 |
47714 |
47724 |
|
|
7/8 |
1 |
3/8 |
2-5/8 |
47741 |
47730 |
|
|
1 |
1 |
3/8 |
2-7/8 |
47722 |
47730 |
|
|
3/4 |
1 |
1/2 |
3 |
47721 |
47739 |
|
|
3/4 |
1-1/4 |
1/2 |
3-1/4 |
47721 |
47739 |
|
|
3/4 |
1-1/2 |
1/2 |
3-1/2 |
47721 |
47739 |
|
|
3/4 |
1-3/4 |
1/2 |
3-3/4 |
47721 |
47739 |
|
|
3/4 |
2 |
1/2 |
4 |
47721 |
47739 |
|
20! |
1 |
1-3/4 |
1/2 |
3-3/4 |
47754 |
47739 |
|
|
1-1/8 |
1 |
1/2 |
3 |
47738 |
47740 |
|
20! |
1-1/8 |
1-1/2 |
1/2 |
3-1/2 |
47738 |
47740 |
|
|
1-1/8 |
2 |
1/2 |
4 |
47738 |
47740 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
Warning: Maximum RPM 20! = 20,000
* For use on hardwood and flooring medallions.
† Double Bearing
+DownShear Angle - The shear angle cuts faster, cleaner and lasts longer than straight angle because of the chip removal speed.
We recommend using shear angle in most instances especially where large diameters are used.
|
|
|
|
