45 Degree Laminate Miter Joint Under-Cut Assembly Router Bits

55314 Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly 1-3/8 Dia x 1/4 x 1/2 Inch Shank

#55314

Specification
Angle (a°) 45°
Diameter (D) 1-3/8
Cutting Height (B) 1/4
Shank (d) 1/2
Overall Length (L) 2-3/8
Replacement Bearing 47727

Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.

a. Laminated top is 'under-cut', as shown.

b. Apron laminate is pre-cut at 45.°

c. Adhere pre-cut laminate for a perfect fit. A fine file

  may be used to remove the sharp edge after joining.

Product Questions

Question on 55314 Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly 1-3/8 Dia x 1/4 x 1/2 Inch Shank


Create Account or Login to ask a question
© 2021 Amana Tool Corporation