Hi, Where could I find the dxf for the spoilboard cutter RC-2250. I purchased the 58pc master set through Toolstoday. The dxf is hard to find. Thanks.
CNC bit Specifications
Please check our web site and you will see that the information you requested is now posted under the part number RC-2250. You might have to sign into your account or create one if you don’t already have one.
Hello Expert, I will be using your HSS 1644 (aluminum cutting spiral) bit on 3/8" aluminum plate. At what speed should the bit turn, and how much material can be removed per pass? What would you recommend as a lubricant/cutting fluid? Thank you.
I would recommend a starting RPM of 2,300 and a feed rate of 27” per minute. A minimum quality lubricant (fine mist) would work well. Please adjust your speed and or feed rate accordingly to prevent buildup of material.
How can I download CNC router bit specifications so that I can add them to my VCarve Pro Tool database. part #45783 (carving Liner) for softwood and hardwood..
Please put the part number of the tool in the search box. When the tool comes up, scroll down and click on the tab that says DXF File. You will have to sign in and then you will be able to down load the file.
Is there a Feed and Chip chart for the 60 degree AMA#45782?
Thank you for the question.
To give you the correct answer, please provide the material you are cutting.
How can I download CNC router bit specifications so that I can add them to my VCarve Pro database?
What particular specifications/items are you looking for?