I have ordered a copy of you shaper book and am wondering if you know of a similar book that would be appropriate for someone using a sliding table shaper. I have a Felder Saw/Shaper combination machine and would like to make best use of the sliding table. I also have a 3ph power feeder that is set up to serve the saw as well as the shaper.
Paso Robles, CA
- Bob
Our Expert
Shaper techniques don't change whether you're using a shaper with or without a sliding table. A sliding table just makes it more convenient to shape large panels because the table supports the workpiece and slides smoothly past the cutter. A sliding table is also useful for shaping end grain, such as when using the Amana Tool no.SC562 Stile and Rail Cabinet Door Set. However, a shaper without a sliding table can also be used to shape large panels and end grain shaping, such as the cope on door rails, can be made with a miter gauge.
If you're unfamiliar with using a shaper I urge you to begin by taking light cuts on large stock, distance your hands from the cutter, and always use a guard.
