202082 Carbide Tipped Brad Point Boring Bit R/H 8.2mm Dia x 77mm Long x 10mm Shank

#202082

Specification
(B) Cutting Height44mm
(D) Diameter8.2mm
(d) Shank10mm
Overall Length (L)77mm
RotationRight Hand
Brad Point Right Hand Boring Bits 77mm Long

Please or

Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life.

Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.
 
Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

© 2020 Amana Tool Corporation