High Production Straight Plunge 1/2 Shank Router Bits
45438 Carbide Tipped Straight Plunge 3/4 Dia x 1 Inch x 1/2 Shank
#45438
| Diameter (D) | 3/4 |
|---|---|
| Cutting Height (B) | 1 |
| Shank (d) | 1/2 |
| Overall Length (L) | 2-5/8 |
| Flutes | 2 |
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Excellent for Cutting:
- Wood
- MDF
- Plywood
AMAX Extended Life Features:
- 200% longer life time even when working with abrasive materials
- Superior geometric design
- Advanced grinding technology that improves the carbides' resistance to wear
- Super clean cuts
Carbide-Tipped-Straight-Plunge-Speed-Chart
Download PDF
Product Questions
What is the minimum Hp power pluger router recommended ?
What is the RPM recommended into hemlock?
What is the RPM recommended into hemlock?
Question by: niko lefrancois on Jun 16, 2017, 1:04 PM
A 1-3/4” HP plunge router should be more than enough. Hemlock is a soft wood. I would start with an RPM rate around 16,000-18,000.
Answer by: Amana Admin on Jun 28, 2017, 2:43 PM
A 1-3/4” HP plunge router should be more than enough. Hemlock is a soft wood. I would start with an RPM rate around 16,000-18,000.
Answer by: Amana Admin on Jun 28, 2017, 2:43 PM
OTHER SIZES AVAILABLE
