High Production Straight Plunge 1/2 Shank Router Bits
45452 Carbide Tipped Straight Plunge High Production 1-1/2 Dia x 1-1/4 x 1/2 Inch Shank
#45452
| Diameter (D) | 1-1/2 |
|---|---|
| Cutting Height (B) | 1-1/4 |
| Shank (d) | 1/2 |
| Overall Length (L) | 2-7/8 |
| Max RPM | 27,500 |
| Flutes | 2 |
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Excellent for Cutting:
- Wood
- MDF
- Plywood
AMAX Extended Life Features:
- 200% longer life time even when working with abrasive materials
- Superior geometric design
- Advanced grinding technology that improves the carbides' resistance to wear
- Super clean cuts
Max RPM = 27,500
Carbide-Tipped-Straight-Plunge-Speed-Chart
Download PDF
Product Questions
Do you have a recommended feedrate and depth of cut for running item 45452 on a CNC router? The max spindle speed is 18000 rpm but I don't see any other information.
Question by: Clint Behling on Feb 21, 2017, 5:10 PM
In soft wood @18,000 RPM and ½” deep at starting feed rate of 150” per minute.
In hard wood @18,000 RPM and 1/2” deep at starting feed rate of 70” per minute.
In hard wood @18,000 RPM and 1/2” deep at starting feed rate of 70” per minute.
Answer by: Amana Tool Admin on Feb 24, 2017, 6:37 PM
In soft wood @18,000 RPM and ½” deep at starting feed rate of 150” per minute.
In hard wood @18,000 RPM and 1/2” deep at starting feed rate of 70” per minute.
In hard wood @18,000 RPM and 1/2” deep at starting feed rate of 70” per minute.
Answer by: Amana Tool Admin on Feb 24, 2017, 6:37 PM
OTHER SIZES AVAILABLE
