V-Groove Spektra™ Extreme Tool Life Coated Router Bits
45646-K Solid Carbide (Brazed To Steel Shank) Cutting Edge 3 Flute V-Groove 90 Deg x 3/8 Dia x 0.188 x 1/4 Inch Shank Spektra™ Extreme Tool Life Coated Router Bit
#45646-K
| Angle (a°) | 90° |
|---|---|
| Diameter (D) | 3/8 |
| Cutting Height (B) | 0.188" |
| B1 | 3/4 |
| Shank (d) | 1/4 |
| Overall Length (L) | 2-1/2 |
| Flutes | 3 |
Cut decorative V-Grooves and lettering on signs with these V-Groove bits. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers.
Solid carbide (brazed to steel shank).
Amana Tool® solid carbide router bits provide consistent, repeatable quality. Every tool is guaranteed to match the geometry on the prints, every time on every order. Best control of carbide grades for woodworking, and absolute control of quality standards on all carbide blanks.
Excellent for cutting:
- 20lbs High Density Urethane
- Acrylic
- Composites
- Composite Decking
- Cork
- Foam
- Laminate
- MDF/HDF
- Melamine
- Plywood
- PVC Plastic
- Sign Board
- Solid Surface
- Veneered Plywood
- Wood
- Xanita® Board
THE ONLY Spektra™ Coated Bits – Made in the USA
Our Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo® provides additional improvements in four critical aspects of router tooling.
- nACo® coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo® offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
Solid Carbide Spektra™ Extreme Tool Life Coated V-Groove Speed and Feed Chart
Download PDF