Bowl & Tray Router Bits
45981 Carbide Tipped Bowl & Tray 1/8 Radius x 1/2 Dia x 1/2 x 1/4 Inch Shank
#45981
Diameter (D) | 1/2 |
---|---|
Radius (R) | 1/8 |
Cutting Height (B) | 1/2 |
Shank (d) | 1/4 |
Overall Length (L) | 2-1/8 |
Flutes | 2 |
For routing solid wood serving trays, flat dishes, shallow bowls, and similar objects, use this 3-in-1 specialty plunging bit. It cuts flat, smooth bottom surfaces, vertical walls, and a transition radius between them, all in one pass. It can be used in handheld, table-mounted and CNC routers.
Vectric and Fusion 360 tool files for 45981 available for download, click here.
Product Questions
Any recommended feeds and speeds and stepdown recommendations for oak?
Question by: Michael on Jul 12, 2020, 7:14 PM
For cutting oak hardwood I would recommend a starting RPM of 16,000 and a feed rate of 150 IPM at 3/16” depth per pass with a chip load of 0.005” per tooth.
Answer by: Amana Admin on Jul 15, 2020, 4:24 PM