Bowl & Tray Router Bits
45986 Carbide Tipped Bowl & Tray 1/4 Radius x 1-1/8 Dia x 5/8 x 1/2 Inch Shank
#45986
Diameter (D) | 1-1/8 |
---|---|
Radius (R) | 1/4 |
Cutting Height (B) | 5/8 |
Shank (d) | 1/2 |
Overall Length (L) | 2-5/8 |
Flutes | 2 |
For routing solid wood serving trays, flat dishes, shallow bowls, and similar objects, use this 3-in-1 specialty plunging bit. It cuts flat, smooth bottom surfaces, vertical walls, and a transition radius between them, all in one pass. It can be used in handheld, table-mounted and CNC routers.
Fusion 360 compatible tool files for 45986 available for download, click here.
Product Questions
Is there a chart of recommended feed rates and RPM? This is going to be used to cut into solid surface about 8.9mm deep.
Question by: Young Chang on Nov 20, 2019, 6:27 PM
Thank you for your email. We currently do not have a chart for this series of solid surface bits. It is a work in progress that is on the list to complete. I have calculated what I would use a starting point for you. At 18,000 RPM I would run at 125 inches per minute with a chip load of 0.004 per tooth.
Answer by: Amana Admin on Nov 20, 2019, 9:41 PM