Classical Bead & Cove Router Bits
54135 Carbide Tipped Classical Cove & Bead 3/8 x 3/8 Radius x 2 Inch Dia x 1 Inch x 1/2 Shank
|Cutting Height (B)||1|
|Overall Length (L)||2-3/4|
The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. With the optional 3/8" pilot bearing, the bit produces a fillet at the base of the bead. Largest diameter bits should be run at reduced speed. Use in a handheld or table-mounted router.
Maximum RPM 18,000.