Ogee Raised Panel Router Bits with Back Cutter
54221 Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 Radius x 3-3/8 Dia x 1-1/16 x 1/2 Inch Shank
#54221
| Cut Depth (A) | 1-3/8 |
|---|---|
| Diameter (D) | 3-3/8 |
| D1 | 2-1/8 |
| Radius (R) | 7/8 |
| Cutting Height (B) | 1-1/16 |
| B1 | 5/8 |
| Shank (d) | 1/2 |
| Overall Length (L) | 3-1/16 |
| A1 | 1-1/16 |
| Replacement Bearing | 47713,47763 |
| R1 | 5/16 |
| Flutes | 2 |
Raised panels fit standard panel grooves, even when the panel thickness exceeds 5/8". As the main cutter raises the front of the panel, the back cutter mills the back to produce a standard-thickness tongue around the panel. Each tool is supplied with two different guide bearings, enabling you to stage cuts on curved edges effectively and safely. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Multiple passes recommended.
Note: Reveal ('A') reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
Note: To recieve ('A1') use bearing #47763.
Maximum RPM 12,000.
