54229 Carbide Tipped Cove Raised Panel with Back Cutter 1-9/16 Radius x 3-3/8 Dia x 1-1/16 x 1/2 Inch Shank


Diameter (D)3-3/8
Cut Depth (A)1-3/8
Radius (R)1-9/16
Cutting Height (B)1-1/16
Shank (d)1/2
Overall Length (L)2-15/16
Replacement Bearing47713,47763
Cove Raised Panel Router Bits with Back Cutter

Please or

Raised panels fit standard panel grooves, even when the panel thickness exceeds 5/8". As the main cutter raises the front of the panel, the back cutter mills the back to produce a standard-thickness tongue around the panel. Each tool is supplied with two different guide bearings, enabling you to stage cuts on curved edges effectively and safely. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Multiple passes recommended.

Note: Reveal ('A') reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.

Note: To recieve ('A1') use bearing #47763.

Maximum RPM 12,000.

Replacement BearingsReplacement Back Cutter
© 2020 Amana Tool Corporation