55110 3D Adapter 1-1/16 Dia x 1 x 1/2 Inch Shank

This 3D adapter is a versatile device used for making compound curves by inserting the adapter over any 1/4" shank router bit. By making it as an adapter and not a solid tool, the system becomes much more flexible as well as cost effective.

Insert adapter over any tool with 1/4" shank up to the maximum diameter of the adapter. For example, tool no. 55110 will fit all tools with up to a 3/4" cutting diameter. The cutting length is adjustable and is limitless to shapes and tools this adapter may be used for.

This adapter was made with 1/2" shank and it can be used in routers with a recommended maximum RPM of 18,000.

This 3D system may be useful especially for small objects, artistic works and other delicate projects. Hence, it could be a complementary system for the Amana miniature router bits with a 3/16" diameter ball bearing.

Additionally, this tool can also be used for small jobs with a drill machine (when one doesn't have a router). In this case, the outer ring, which revolves against the tool, serves as a small "router table". For this application, Amana recommends a minimum of 3,000 RPM.

Tool comes with 2 Allen Keys.
 
5009 – 1/8” Allen Key for the screw on the side.
5003 – 5/32” Allen Key
Use to set screw M8" inside the shank of the tool.
This screw makes it easier to adjust the length accurately and safely.
 
You need an Allen key – 5/32" (Amana #5003) to adjust the required length of the shank. Only then, you can tighten the set screw that holds the tool from the side.

This adapter can be used with Amana Tool® #'s 49492, 49496, MR0101, MR0100, MR0105, MR0102, MR0103, MR0104, MR1010, MR1004, MR0106, MR0107, MR0108, MRR108, MR0110, MR0112, MR0114, MRR110 and MR1020.