2-Pc Solid Surface Tapered Plug Cutter Set
55413 2-Pc Carbide Tipped Solid Surface Tapered Plug Cutter Repair Router Bit Set 1-3/4 Dia x 1-3/16 x 1/2 Inch Shank
#55413
| Angle (a°) | 15° |
|---|---|
| Diameter (D) | 1-3/4 |
| Cutting Height (B) | 1-3/16 |
| B1 | 1" |
| Shank (d) | 1/2 |
| Overall Length (L) | 3-1/16 |
Special design to repair holes, gouges and defects on top of the materials.
This set was designed primarily for reparing solid surface materials. It can be used on wood as well if required.
The recommended RPM is to a degree dependent on the type of equipment and the stability of the setup when cutting.
Using Plunging Router
The maximum speed for using this set is 10,000 RPM. It is important to work very slowly and steadily. We recommend securing the router with clamps so the machine is fixed firmly in place.
Using Drill Press
When working on a drill press we recommend speed of 2,000 to 3,000 RPM. Here it is important that the work is firmly clamped to ensure stability.