55421 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 Dia x 11/16 x 5/32 Radius x 1/2 Inch Shank Set

#55421

Specification
Diameter (D)1-5/8
Radius (R)1/4
Cutting Height (B)11/16
Shank (d)1/2
Overall Length (L)3-1/8
B11/4
TypeConcave
Flutes2
C3/8
# Wings2

2-pc Concave Stile & Rail Router Bit Sets for 3/4 Inch Material

Please or

Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness. The same three profiles are available in either configuration.

3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary – using the provided shims – after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

© 2020 Amana Tool Corporation