2-pc Ogee Stile & Rail Router Bit Sets for 3/4 to 1 Inch Material
55430 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1-1/16 x 1/4 Radius x 1/2 Inch Shank Set
#55430
Diameter (D) | 1-5/8 |
---|---|
Radius (R) | 1/4 |
Cutting Height (B) | 1-1/16 |
B1 | 1/4 |
Shank (d) | 1/2 |
Overall Length (L) | 3-5/16 |
Type | Ogee |
Replacement Bearing | 47708 |
Material size | 3/4"-1" |
Flutes | 2 |
C | 3/8 |
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.)
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.