Combination Ripping & Crosscut Saw Blades
610504C Carbide Tipped Prestige® Combination Ripping and Crosscut 10 Inch Dia x 50T 4+1, 15 Deg, 5/8 Bore
#610504C
| (D) Diameter | 10 (250mm) |
|---|---|
| Teeth | 50 |
| (d) Bore | 5/8 |
| Tooth Grind | 4&1 |
| Hook Angle | 15° |
| Kerf (B) | .138 (3.5mm) |
| Plate (C) | .100 (2.5mm) |
Where one blade must do almost everything – ripping and crosscutting hardwood and softwood, cutting plywood – this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved chip ejection.
Clamshell packed.
Product Questions
OTHER SIZES AVAILABLE
