3 Part Insert Adjustable Grooving Shaper Cutters with Scorer 4 to 15.5mm
61354 3-Piece Insert Carbide Adjustable Groove with Scorer 150mm (5-7/8) Dia x 4.0 to 15.5mm (5/32 to 5/8) x 1-1/4 Bore
#61354
| (D) Diameter | 150mm (5-7/8) |
|---|---|
| (d) Bore | 1-1/4 |
| (B) Cutting Height | 4 to 15.5mm (5/32 to 5/8) |
| Max. t | 45mm (1-3/4) |
| Replacement Knives | RCK-18(4), RCK-71(4), AMA-17(2) |
Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm increments by using supplied spacer rings.
Product Questions
hi i asked a question but no response yet. need to know if amana offers a similar (bore, diameter) adj. groover for wider grooves than 15.5mm. for example 14-28mm or similar
Question by: imran malik on Oct 12, 2020, 3:01 PM
The 61414 was not made to work with the 61354 tool, they are two independent tools. If you want to go beyond the 15.5mm cutting width you will have to look at the following tools:
https://www.amanatool.com/61350-insert-carbide-adjustable-groove-rabbet-with-scorer-160mm-6-5-16-dia-x-4-0-to-7-5mm-5-32-to-19-64-x-1-1-4-bore.html?ff=1&fp=6355
https://www.amanatool.com/61360-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-8-to-15mm-5-16-to-19-32-x-1-1-4-bore.html?ff=1&fp=6356
https://www.amanatool.com/61362-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-12-5-to-24mm-1-2-to-15-16-x-1-1-4-bore.html?ff=1&fp=6357
By adding these two tools below you are able to add these to the three cutters above to increase the width of your cutting height.
https://www.amanatool.com/61384-intermediate-stackable-cutter-160mm-6-5-16-dia-x-7mm-9-32-x-1-1-4-bore.html?ff=1&fp=6413
https://www.amanatool.com/61386-intermediate-stackable-cutter-160mm-6-5-16-dia-x-15mm-19-32-x-1-1-4-bore.html?ff=1&fp=6414
I hope this helps.
https://www.amanatool.com/61350-insert-carbide-adjustable-groove-rabbet-with-scorer-160mm-6-5-16-dia-x-4-0-to-7-5mm-5-32-to-19-64-x-1-1-4-bore.html?ff=1&fp=6355
https://www.amanatool.com/61360-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-8-to-15mm-5-16-to-19-32-x-1-1-4-bore.html?ff=1&fp=6356
https://www.amanatool.com/61362-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-12-5-to-24mm-1-2-to-15-16-x-1-1-4-bore.html?ff=1&fp=6357
By adding these two tools below you are able to add these to the three cutters above to increase the width of your cutting height.
https://www.amanatool.com/61384-intermediate-stackable-cutter-160mm-6-5-16-dia-x-7mm-9-32-x-1-1-4-bore.html?ff=1&fp=6413
https://www.amanatool.com/61386-intermediate-stackable-cutter-160mm-6-5-16-dia-x-15mm-19-32-x-1-1-4-bore.html?ff=1&fp=6414
I hope this helps.
Answer by: Amana Admin on Oct 12, 2020, 7:47 PM
hi, i would like to increase grooving range beyond 15.5mm. when i bought this last year there was another groover for the next range but i do not see any in 150mm dia. i see 61414. is this meant to be used with 61354?
https://www.toolstoday.com/v-8963-61414.html
appreciate your feedback on my options.
https://www.toolstoday.com/v-8963-61414.html
appreciate your feedback on my options.
Question by: imran malik on Oct 4, 2020, 12:29 AM
The 61414 was not made to work with the 61354 tool, they are two independent tools. If you want to go beyond the 15.5mm cutting width you will have to look at the following tools:
https://www.amanatool.com/61350-insert-carbide-adjustable-groove-rabbet-with-scorer-160mm-6-5-16-dia-x-4-0-to-7-5mm-5-32-to-19-64-x-1-1-4-bore.html?ff=1&fp=6355
https://www.amanatool.com/61360-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-8-to-15mm-5-16-to-19-32-x-1-1-4-bore.html?ff=1&fp=6356
https://www.amanatool.com/61362-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-12-5-to-24mm-1-2-to-15-16-x-1-1-4-bore.html?ff=1&fp=6357
By adding these two tools below you are able to add these to the three cutters above to increase the width of your cutting height.
https://www.amanatool.com/61384-intermediate-stackable-cutter-160mm-6-5-16-dia-x-7mm-9-32-x-1-1-4-bore.html?ff=1&fp=6413
https://www.amanatool.com/61386-intermediate-stackable-cutter-160mm-6-5-16-dia-x-15mm-19-32-x-1-1-4-bore.html?ff=1&fp=6414
I hope this helps.
https://www.amanatool.com/61350-insert-carbide-adjustable-groove-rabbet-with-scorer-160mm-6-5-16-dia-x-4-0-to-7-5mm-5-32-to-19-64-x-1-1-4-bore.html?ff=1&fp=6355
https://www.amanatool.com/61360-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-8-to-15mm-5-16-to-19-32-x-1-1-4-bore.html?ff=1&fp=6356
https://www.amanatool.com/61362-insert-carbide-adjustable-groove-with-scorer-160mm-6-5-16-dia-x-12-5-to-24mm-1-2-to-15-16-x-1-1-4-bore.html?ff=1&fp=6357
By adding these two tools below you are able to add these to the three cutters above to increase the width of your cutting height.
https://www.amanatool.com/61384-intermediate-stackable-cutter-160mm-6-5-16-dia-x-7mm-9-32-x-1-1-4-bore.html?ff=1&fp=6413
https://www.amanatool.com/61386-intermediate-stackable-cutter-160mm-6-5-16-dia-x-15mm-19-32-x-1-1-4-bore.html?ff=1&fp=6414
I hope this helps.
Answer by: Amana Admin on Oct 9, 2020, 7:38 PM