Polycrystalline Diamond (PCD) Engraving, V-Grooving and Chamfering Router Bits
DRB-418 CNC Polycrystalline Diamond (PCD) 90 Degree Engraving, V-Grooving and Chamfering Router Bit 1/2 Dia x 1/4 x 1/4 Shank
#DRB-418
| (a°) Angle | 90° |
|---|---|
| (D) Diameter | 1/2 |
| D1 | 0.004" |
| (B) Cutting Height | 1/4 |
| B1 | 3/8 |
| (d) Shank | 1/4 |
| Overall Length (L) | 2-1/4 |
| Max RPM | 24,000 |
| Flutes | 1 |
Diamond is the hardest material on the earth. Polycrystalline Diamond (PCD) tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate which allows the diamond to be brazed onto a tool body.
If you’re looking for the ultimate in tooling you’ve found it! Amana Tool®'s PCD tipped 90 degree engraving V-grooving and chamfering CNC router bits will groove a wide variety of tough abrasive materials including composites particleboard MDF (both raw or with melamine) veneer and hardwoods. The cutting edge lasts much longer than carbide for extremely long life.
Excellent for V-Grooving and Chamfering:
- Aluminum Composite Material (ACM)
- Carbon Fiber
- Composites
- Composite Decking
- Hard Wood
- Laminated Chipboard and MDF
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
Excellent for Engraving:
- Aluminum Brass & Copper
- Aluminum Composite Material (ACM)
- Aluminum Composites
- Carbon Fiber
- Coroplast®
- Hard Wood
- HDPE
- King Starboard® / Marine Building Material
- Laminated Chipboard and MDF
- Metal Alloys that don't contain Iron
- PCB Board
- Phenolic
- Plastics
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
- Titanium
- Harder cutting edge provides higher resistance to wear
- Cut thousands of feet more than carbide without changing tool saving setup time
- Optimized machine tool efficiency
- Quality of finish is often significantly improved
Polycrystalline Diamond (PCD) V-Engraving Speed and Feed Chart
Download PDF
Product Questions
