I'm looking for a rail & stile set for door frames that are 1/2" thick. I will then have beveled mirrors installed in the frames to create the
doors. I have a rail & stile set, but is for use on 3/4" frames. Does a set for 1/2" frames exist? Thanks in advance for your response.
-Jim
Robbinsville, NC
Our Expert
To make a simple door for a medicine cabinet you can use the Amana Tool slot cutter #53308-1. This tool cuts a 3/16" wide slot; you can control the depth of the slot with the position of the fence on the router table. Use two passes of the slot cutter to cut the tenons on the ends of the rails stock. Then adjust the height to cut a groove for the mirror.
