I HAVE THE AMANA RAISED PANEL SET, BOTH Timberline® TRS-260 & Amana Tool® AMS-201 I HAD NO PROBLEM CUTTING THE STILES & RAILS. I WOULD LIKE TO NOW CUT THE TRADITIONAL RAISED PANEL INSERTS. I HAVE A SHOPSMITH WITH ALL THE ATTACHMENTS. THANK YOU FOR ANY HELP YOU MY GIVE ME!
Valley Stream , NY
Kitchen Cabinet Doors
Our Expert
Whenever you shape raised panels with a router table there are some things to consider:
-Don't exceed the recommended RPM of the bit.
-Use only flat stock that is free of warp or twist
-Always feed the stock against the bit's rotation. Don't climb cut.
-Take several passes rather than one heavy pass
-Always use panel-raising bits in a table-mounted router. Never use in a hand-held router
-For the best results always shape the end-grain first followed by the long-grain
-Use a guard