Ball End Insert CNC Router Bits
RC-1126 CNC Ball End Insert Carbide 1/2 Radius x 1 Inch Dia x 1/2 x 1/2 Shank
#RC-1126
| (D) Diameter | 1 |
|---|---|
| D1 | 43/64 |
| (R) Radius | 1/2 |
| (B) Cutting Height | 15/16 |
| (d) Shank | 1/2 |
| Overall Length (L) | 2-7/8 |
| Max RPM | 18,000 |
| Screw # | 67115 |
| Replacement Knives | RCK-54 |
| Flutes | 2 |
Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the D1 dimension of the ball end bit.
Note: Profile is useful as a ‘conduit’ for cables pipes etc.
Maximum RPM 18 000.
Warning: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only. Do not use in portable routers.
Vectric compatible tool file for RC-1126 available for download, click here.
Insert Carbide Ball End Speed and Feed Chart
Download PDF