Corner Rounding Router Bits
49523 Carbide Tipped Corner Round 1-1/8 Radius x 2-3/4 Dia x 1-3/8 x 1/2 Inch Shank
#49523
| Diameter (D) | 2-3/4 |
|---|---|
| D1 | 1/2 |
| Radius (R) | 1-1/8 |
| Cutting Height (B) | 1-3/8 |
| Shank (d) | 1/2 |
| Overall Length (L) | 3-3/4 |
| Replacement Bearing | 47706 |
| Flutes | 2 |
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Maximum RPM 16,000. Use in a table-mounted router. Not for use in a handheld router! Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.
Excellent for cutting:
- Acrylic
- Laminate
- MDF/HDF
- Melamine
- Wood
- Plywood
Product Questions
