InStile & Rail System Flat Panel Adjustable Stile & Rail Router Bit Sets

55432 Carbide Tipped Adjustable Straight with Bevel Instile and Rail System 1-7/8 Dia x 5/8 to 1-1/8 x 18 Deg x 1/2 Inch Shank Set

#55432

Specification
Angle (a°) 18°
Diameter (D) 1-7/8
Cutting Height (B) 5/8 to 1-1/8
Shank (d) 1/2
Overall Length (L) 3-11/32
Type Straight with Bevel
Flutes 2
C 1/2
B1 for 1/4" Plywood 3/16 to 9/32
B1 for 1/2" Plywood 7/16 to 17/32

Bits in these sets have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary - using the provided shims - after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Tool No.Bearing(s)

Product Questions

Could you please advise on the recommended speed this router bit should spin at?
Question by: Storm Garcia on Dec 25, 2015, 11:34 AM
16,000 - 18,000 RPM Depending on the hardness of your wood.
Answer by: admin admin on Jun 15, 2016, 6:38 AM

Question on 55432 Carbide Tipped Adjustable Straight with Bevel Instile and Rail System 1-7/8 Dia x 5/8 to 1-1/8 x 18 Deg x 1/2 Inch Shank Set


Create Account or Login to ask a question
© 2021 Amana Tool Corporation