55439 Carbide Tipped Adjustable Mission Style Straight Instile and Rail System 1-7/8 Dia x 5/8 to 1-1/8 x 1/2 Inch Shank Set

#55439

Specification
Diameter (D)1-7/8
Cutting Height (B)5/8 to 1-1/8
Shank (d)1/2
Overall Length (L)3-11/32
TypeMission (Straight)
Flutes2
C1/2
B1 for 1/4" Plywood3/16 to 9/32
B1 for 1/2" Plywood7/16 to 17/32

Mission Style InStile & Rail System Flat Panel Adjustable Stile & Rail Router Bit Sets

Please or

Bits in these sets have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary - using the provided shims - after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Tool No.Bearing(s)
© 2021 Amana Tool Corporation