Is there a matching glass door bit for your mission router bits door set #55438. If so, I'd like to get it too, when I order the set. The set is just what I was looking for.
-Wayne S.
Yourba Linda, CA
Build a Mission Style Door with Glass Panes
Our Expert
To construct a Mission Style door with glass panes I suggest that
you use a mortise-and-tenon joint at each corner for strength. I've provided a drawing of a sample door and here are the steps:
1. Layout and cut 1/4" mortises on the stiles to accept the rails. Center the tenon on the thickness of the stock.
2. Use the Amana Tool dado head no.658030 to cut tenons on the
ends of the rails and mullions. The tenon shoulders are offset 1/4"
for the glass rabbet.
3. Use the Amana Tool no.49360 Superabbet to cut a 1/4" by 1/2" rabbet along the inside edges of the stock.
4. Assemble the door.